[Previous]
[Next]
NAME:
qplot
PURPOSE
To quicken the plotting process for simple plots
Defaults
plot,xx,yy,/ynoz,psym=-1
CALLING SEQUENCE
qplot,xx,yy
qplot,xx,yy,psym=2
HISTORY
Written by LWA on 15-Nov-93.
CALLED BY
even_light_info
[Previous]
[Next]
NAME:
QUARTILE
PURPOSE:
list quartile points of a distribution
CATEGORY:
CALLING SEQUENCE:
qq = quartile(dist)
INPUTS:
dist, a vector
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
COMMON BLOCKS:
SIDE EFFECTS:
RESTRICTIONS:
MODIFICATION HISTORY:
HSH, written 16-Nov-96
[Previous]
[Next]
NAME:
QUEUE_STUFF
PURPOSE:
Plot queue pages/sectors, DP bit rate and Ca XIX lightcurve
against time for diagnostic of BCS Queue Memory
CALLING SEQUENCE:
.run queue_stuff
INPUTS:
none
OUTPUTS:
graphic output
RESTRICTIONS:
Must be run after CPU_DIAG
PROCEDURE:
MODIFICATION HISTORY:
RDB Autumn, 91
RDB 11-May-94 Remapped the dp modes and bitrates for more compact
plot, added SAA, Night and DP Flare
RDB 13-May-94 Added HVMON plot; option to only do 2nd plot...
RDB 30-Aug-94 Read roadmap if not present
[Previous]
[Next]
NAME:
QUICK_DPE
PURPOSE:
Show the last few DPE values for checking
CATEGORY:
CALLING SEQUENCE:
quick_dpe
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
deltat, the look-back time limit (default 10,000 sec)
OUTPUTS:
CALLS: ***
FILE2TIME, FMT_TIMER [1], FMT_TIMER [2], OUTPLOT [1], OUTPLOT [2], OUTPLOT [3]
Rd_Roadmap [2], TIMESTAMP, UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4]
UTPLOT [5], UTPLOT [6], UTPLOT_IO [1], UTPLOT_IO [2], UTPLOT_IO [3], fem_grid [1]
fem_grid [2], file_list [1], file_list [2], gt_dp_mode [1], gt_dp_mode [2], gt_dpe
gt_filtb, gt_res, int2secarr [1], int2secarr [2], rd_gxd [1], rd_gxd [2], rd_gxd [3]
rd_roadmap [1]
COMMON BLOCKS:
SIDE EFFECTS:
RESTRICTIONS:
MODIFICATION HISTORY:
15-Oct-99, written by HSH with JIK, LF consultation
8-Nov-99, fixed UTPLOT mistake (HSH)
15-nov-99, (PGS) modified logic test for n_elements(dag_f) gt 0
and n_elements(dag_h)
10-jan-99, (PGS) modified file_list to sort on two digit year, y2k.
21-Apr-00, (BNH) added a time stamp to the plot and titled the
X-ray flux graph.
[Previous]
[Next]
NAME:
quick_plottrav
PURPOSE:
Display the ops PLOT_TRAV entries for the current year.
CATEGORY:
SXT_CO quick page support.
CALLING SEQUENCE:
quick_plottrav
INPUTS:
None.
OPTIONAL (KEYWORD) INPUT PARAMETERS:
None.
CALLS: ***
WDEF [1], WDEF [2], anytim2ints [1], anytim2ints [2], fmt_tim [1], fmt_tim [2]
plot_trav [1], plot_trav [2], plot_trav [3]
SIDE EFFECTS:
makes a plot in the current window
MODIFICATION HISTORY:
18-Apr-00 (BNH) - Written
[Previous]
[Next]
NAME:
quick_sirius
PURPSOSE:
To check the data that has already been copied from SIRIUS, and
copy all new that that has arrived since then (using GET_SIRIUS)
INPUT:
none required
OPTIONAL INPUT:
nocopy - If present, just print status information, do not
start the copy from SIRIUS.
OUTPUT:
st_tim - Start time structure with .time and .day fields
en_tim - End time structure with .time and .day fields
HISTORY:
Written 14-Nov-91 by M.Morrison
[Previous]
[Next]
NAME:
QUICKATT
PURPOSE:
Look at last few days of ATT data for quality. The following
interpretation applies:
4: good
2: bad
1: I don't know. We should ask Jean-Pierre.
The occasional 2 values near start of orbit seem to coincide
with UV flood and perhaps don't mean so much.
CATEGORY:
CALLING SEQUENCE:
main program
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4], UTPLOT [5], UTPLOT [6], WDEF [1]
WDEF [2], anytim2ints [1], anytim2ints [2], fem_grid [1], fem_grid [2]
fmt_tim [1], fmt_tim [2], rd_att, rd_obs
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
5-mar-98, written (HSH)
12-May-98, extended interval to 3 days when necessary to
allow operation over for weekend gaps. Beware
New Year's! (HSH)
2-Jul-98, changed psym on plot (HSH)
18-jul-98, convertd to procedure (HSH)
5-aug-98, trapped on no ATT data (HSH)
[Previous]
[Next]
NAME:
QUICKATT
PURPOSE:
Look at last few days of ATT data for quality. The following
interpretation applies:
4: good
2: bad
1: I don't know. We should ask Jean-Pierre.
The occasional 2 values near start of orbit seem to coincide
with UV flood and perhaps don't mean so much.
CATEGORY:
CALLING SEQUENCE:
quickatt
INPUTS:
SIDE determines the size of the plot
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4], UTPLOT [5], UTPLOT [6], WDEF [1]
WDEF [2], anytim2ints [1], anytim2ints [2], fem_grid [1], fem_grid [2]
fmt_tim [1], fmt_tim [2], rd_att, rd_obs
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
5-mar-98, written (HSH)
12-May-98, extended interval to 3 days when necessary to
allow operation over for weekend gaps. Beware
New Year's! (HSH)
2-Jul-98, changed psym on plot (HSH)
18-jul-98, convertd to procedure (HSH)
5-aug-98, trapped on no ATT data (HSH)
13-aug-98, replaced hard paths with environment paths (DA)
[Previous]
[Next]
NAME:
QUICKDARK
PURPOSE:
Look at last few days of dark data for any changes.
The plot shows image totals of the standard daily darks.
The dashed line shows the level as of the end of June, 1998
plus the SAA images - a lot of them, since we do Med rate then.
Keep your eye on the off-scale points!
CATEGORY:
CALLING SEQUENCE:
main program
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
2-jul-98, written (HSH)
18-jul-98, made into a procedure (HSH)
[Previous]
[Next]
NAME:
QUICKDARK
PURPOSE:
Look at last few days of dark data for any changes.
The plot shows image totals of the standard daily darks.
The dashed line shows the level as of the end of June, 1998
plus the SAA images - a lot of them, since we do Med rate then.
Keep your eye on the off-scale points!
CATEGORY:
CALLING SEQUENCE:
main program
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
FILE2TIME, FMT_TIMER [1], FMT_TIMER [2], OUTPLOT [1], OUTPLOT [2], OUTPLOT [3]
RD_XDA [1], RD_XDA [2], Rd_Roadmap [2], TIMESTAMP, UTPLOT [1], UTPLOT [2]
UTPLOT [3], UTPLOT [4], UTPLOT [5], UTPLOT [6], WDEF [1], WDEF [2], anytim2ints [1]
anytim2ints [2], evt_grid, file_list [1], file_list [2], get_logenv [1]
get_logenv [2], gt_dpe, gt_expmode, gt_filta, gt_filtb, gt_percentd, rd_roadmap [1]
saa_in [1], saa_in [2], sxt_decomp [1], sxt_decomp [2], tim2dset [1], tim2dset [2]
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
2-jul-98, written (HSH)
18-jul-98, made into a procedure (HSH)
13-aug-98, changed hard paths to environment paths (DA)
22-aug-98, changed path to $DIR_SITE_NEWDATA* (HSH)
22-Jul-99, Make plot work during CCD bakeout (BNH)
14-Aug-99, Reduce plot ranges; added qstop (HSH)
28-Sep-99, Changed findfile to find_file to handle long strings. (PGS)
11-jan-99, explicitely sorted by time the output from find_file, y2k (PGS)
23-aug-00, changed find_file to file_list
[Previous]
[Next]
NAME:
QUICKDRIFT
PURPOSE:
look at the /yd3/reformat on-line data for Yohkoh drift
CATEGORY:
CALLING SEQUENCE:
.run quickdrift
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
Rd_Roadmap [2], UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4], UTPLOT [5]
UTPLOT [6], WDEF [1], WDEF [2], rd_roadmap [1], sxt_cen [1], sxt_cen [2]
COMMON BLOCKS:
SIDE EFFECTS:
takes about a minute to run, makes a plot in your current window
RESTRICTIONS:
MODIFICATION HISTORY:
7-Jul-98, written (HSH)
18-jul-98, converted to procedure (HSH)
[Previous]
[Next]
NAME:
QUICKDRIFT
PURPOSE:
look at the /yd3/reformat on-line data for Yohkoh drift
CATEGORY:
CALLING SEQUENCE:
.run quickdrift
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
Rd_Roadmap [2], UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4], UTPLOT [5]
UTPLOT [6], WDEF [1], WDEF [2], rd_roadmap [1], sxt_cen [1], sxt_cen [2]
COMMON BLOCKS:
SIDE EFFECTS:
takes about a minute to run, makes a plot in your current window
RESTRICTIONS:
MODIFICATION HISTORY:
7-Jul-98, written (HSH)
18-jul-98, converted to procedure (HSH)
[Previous]
[Next]
NAME:
QUICKLIMB
PURPOSE:
show in 2D where (if at all) ATT is failing
CATEGORY:
CALLING SEQUENCE:
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
FMT_TIMER [1], FMT_TIMER [2], Rd_Roadmap [2], rd_att, rd_roadmap [1], sxt_cen [1]
sxt_cen [2], tim2dset [1], tim2dset [2]
COMMON BLOCKS:
SIDE EFFECTS:
RESTRICTIONS:
MODIFICATION HISTORY:
7-Jul-98, written (HSH)
25-Jul-98, converted to procedure and improved (HSH)
[Previous]
[Next]
NAME:
QUICKLIMB
PURPOSE:
show in 2D where (if at all) ATT is failing
CATEGORY:
CALLING SEQUENCE:
INPUTS:
tstart, tstop
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
CALLS: ***
FMT_TIMER [1], FMT_TIMER [2], Rd_Roadmap [2], rd_att, rd_roadmap [1], sxt_cen [1]
sxt_cen [2], tim2dset [1], tim2dset [2]
COMMON BLOCKS:
SIDE EFFECTS:
RESTRICTIONS:
MODIFICATION HISTORY:
7-Jul-98, written (HSH)
25-Jul-98, converted to procedure and improved (HSH)
13-aug-98, changed hard paths to environment paths (DA)
22-aug-98, revised same (HSH)
7-sep-98, fixed bug (HSH)
10-sep-98, added t1, t2 inputs (HSH)
[Previous]
[Next]
NAME:
QUICKLIMB
PURPOSE:
show in 2D where (if at all) ATT is failing
CATEGORY:
CALLING SEQUENCE:
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
COMMON BLOCKS:
SIDE EFFECTS:
RESTRICTIONS:
MODIFICATION HISTORY:
7-Jul-98, written (HSH)
25-Jul-98, converted to procedure and improved (HSH)
13-aug-98, changed hard paths to environment paths (DA)
22-aug-98, revised same (HSH)
7-sep-98, fixed bug (HSH)
[Previous]
[Next]
NAME:
QUICKSTRAY
PURPOSE:
look at last few days of SLS data for new leaks
CATEGORY:
CALLING SEQUENCE:
main program
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
OUTPUTS:
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
5-mar-98, written (HSH)
18-jul-98, converted to procedure (HSH)
[Previous]
[Next]
NAME:
QUICKSTRAY
PURPOSE:
look at last few days of SLS data for new leaks
CATEGORY:
CALLING SEQUENCE:
quickstray, index, data, days=-28
INPUTS:
OPTIONAL (KEYWORD) INPUT PARAMETERS:
side, output image size
qstop, stops for debugging
days, lookback time in days (negative!)
(default is 14)
OUTPUTS:
index, the index variable for WDBAN images
data, the total counts for the same (note - we don't get
these during bakeouts, apparently)
CALLS: ***
OUTPLOT [1], OUTPLOT [2], OUTPLOT [3], RD_XDA [1], RD_XDA [2], Rd_Roadmap [2]
TIMESTAMP, UTPLOT [1], UTPLOT [2], UTPLOT [3], UTPLOT [4], UTPLOT [5], UTPLOT [6]
WDEF [1], WDEF [2], gt_expmode, gt_filta, gt_filtb, gt_percentd, gt_res
int2secarr [1], int2secarr [2], newfiles [1], newfiles [2], newfiles [3]
rd_roadmap [1], reltime [1], reltime [2], sel_filetimes [1], sel_filetimes [2]
sxt_decomp [1], sxt_decomp [2]
COMMON BLOCKS:
SIDE EFFECTS:
makes a plot in the current window
RESTRICTIONS:
MODIFICATION HISTORY:
5-mar-98, written (HSH)
18-jul-98, converted to procedure (HSH)
13-aug-98, changed hard paths to environment paths (DA)
22-aug-98, revised same (HSH)
17-apr-1999 - S.L.Freeland - subselect recent 14 days
9-may-1999, incorporated new WDBAN monitor images, along
with an empirical factor to match (HSH)
6-aug-1999, fixed bug in xrange (HSH)
21-oct-1999, hack to include both channels of bifurcation in NaBan,
top two channels in WdBan trifurcation. Also adjusted
empirical scaling factors. (DMcK)
19-apr-2000, rehacked the "other" image plotting (HSH, sorry it's ugly)
28-sep-2000, added output and "days" keyword (HSH, AT)
7-nov-2001, moved Y range and added dotted lines so we don't miss any
odd points (HSH)
[Previous]
[Next]
NAME:
quit
PURPOSE:
exit
CALLS: ***
yesnox [1], yesnox [2]
HISTORY:
HSH, written 27-Jan-92
HSH, added check 11-jan-94
[Previous]
[Next]
NAME : quvcal (procedure)
PURPOSE : calibration of QUV cross-talk for T1
CALLING SEQUENCE :
quvcal,q,u,v
INPUTS :
q,u,v -- pol. degree *10000 (q,u,v already devided by img)
KEYWORD PARAMETERS :
OUTPUTS :
MODIFICATION HISTORY :
K.Ichimoto, 1993/02/07